A residual gas analyzer (RGA) is a small and usually rugged mass spectrometer, typically designed for process control and contamination monitoring in vacuum systems. Utilizing quadrupole technology, there exists two implementations, utilizing either an open ion source (OIS) or a closed ion source (CIS). RGAs may be found in high vacuum applications such as research chambers, surface science setups, accelerators, scanning microscopes, etc. RGAs are used in most cases to monitor the quality of the vacuum and easily detect minute traces of impurities in the low-pressure gas environment. These impurities can be measured down to Torr levels, possessing sub-ppm detectability in the absence of background interferences.
RGAs would also be used as sensitive in-situ, helium leak detectors. With vacuum systems pumped down to lower than Torr—checking of the integrity of the vacuum seals and the quality of the vacuum—air leaks, virtual leaks and other contaminants at low levels may be detected before a process is initiated.
Read more about Residual Gas Analyzer: Open Ion Source, Closed Ion Source
Famous quotes containing the words residual and/or gas:
“The volatile truth of our words should continually betray the inadequacy of the residual statement. Their truth is instantly translated; its literal monument alone remains.”
—Henry David Thoreau (1817–1862)
“... when I awake in the middle of the night, since I knew not where I was, I did not even know at first who I was; I only had in the first simplicity the feeling of existing as it must quiver in an animal.... I spent one second above the centuries of civilization, and the confused glimpse of the gas lamps, then of the shirts with turned-down collars, recomposed, little by little, the original lines of my self.”
—Marcel Proust (1871–1922)