Safety
Oxyacetylene welding/cutting is not difficult, but there are a good number of subtle safety points that should be learned such as:
- More than 1/7 the capacity of the cylinder should not be used per hour. This causes the acetone inside the acetylene cylinder to come out of the cylinder and contaminate the hose and possibly the torch.
- Acetylene is dangerous above 15 psi pressure. It is unstable and explosively decomposes.
- Proper ventilation when welding will help to avoid large chemical exposure.
Read more about this topic: Oxy-fuel Welding And Cutting
Famous quotes containing the word safety:
“There is always safety in valor.”
—Ralph Waldo Emerson (1803–1882)
“There was only one catch and that was Catch-22, which specified that a concern for one’s own safety in the face of dangers that were real and immediate was the process of a rational mind.... Orr would be crazy to fly more missions and sane if he didn’t, but if he was sane he had to fly them. If he flew them he was crazy and didn’t have to; but if he didn’t want to he was sane and had to.”
—Joseph Heller (b. 1923)
“Perhaps in a book review it is not out of place to note that the safety of the state depends on cultivating the imagination.”
—Stephen Vizinczey (b. 1933)