Resource Indexing
Modular devices may dynamically increase or decrease their SNMP indices (aka instances) whenever slotted hardware is added or removed. Although this is most common with hardware, virtual interfaces have the same effect. Index values are typically assigned at boot time and remain fixed until the next reboot. Hardware or virtual entities added while the device is 'live' may have their indices assigned at the end of the existing range and possibly reassigned at the next reboot. Network inventory and monitoring tools need to have the device update capability by properly reacting to the cold start trap from the device reboot in order to avoid corruption and mismatch of polled data.
Index assignments for an SNMP device instance may change from poll to poll mostly as a result of changes initiated by the system admin. If information is needed for a particular interface, it is imperative to determine the SNMP index before retrieving the data needed. Generally, a description table like ifDescr will map a user friendly name like Serial 0/1 (Blade 0, port 1) to an SNMP index.
Read more about this topic: Simple Network Management Protocol
Famous quotes containing the word resource:
“If there is nothing new on the earth, still the traveler always has a resource in the skies. They are constantly turning a new page to view. The wind sets the types on this blue ground, and the inquiring may always read a new truth there.”
—Henry David Thoreau (1817–1862)