Transformer Wiring Color Codes
Power transformers used in North American vacuum-tube equipment often were color-coded to identify the leads. Black was the primary connection, red secondary for the B+ (plate voltage), red with a yellow tracer was the center tap for the B+ full-wave rectfier winding, green or brown was the heater voltage for all tubes, yellow was the filament voltage for the rectifier tube (often a different voltage than other tube heaters). Two wires of each color were provided for each circuit, and phasing was not identified by the color code.
Audio transformers for vacuum tube equipment were coded blue for the finishing lead of the primary, red for the B+ lead of the primary, brown for a primary center tap, green for the finishing lead of the secondary, black for grid lead of the secondary, and yellow for a tapped secondary. Each lead had a different color since relative polarity or phase was more important for these transformers. Intermediate-frequency tuned transformers were coded blue and red for the primary and green and black for the secondary.
Read more about this topic: Electronic Color Code
Famous quotes containing the words transformer, color and/or codes:
“Man, became man through work, who stepped out of the animal kingdom as transformer of the natural into the artificial, who became therefore the magician, man the creator of social reality, will always stay the great magician, will always be Prometheus bringing fire from heaven to earth, will always be Orpheus enthralling nature with his music. Not until humanity itself dies will art die.”
—Ernst Fischer (1899–1972)
“The sky above the port was the color of television, tuned to a dead channel.”
—William Gibson (b. 1948)
“Thou hast a voice, great Mountain, to repeal
Large codes of fraud and woe; not understood
By all, but which the wise, and great, and good
Interpret, or make felt, or deeply feel.”
—Percy Bysshe Shelley (1792–1822)