Standards
- International Organization for Standardization (ISO)
- ISO 3059, Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions
- ISO 3452-1, Non-destructive testing. Penetrant testing. Part 1. General principles
- ISO 3452-2, Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials
- ISO 3452-3, Non-destructive testing - Penetrant testing - Part 3: Reference test blocks
- ISO 3452-4, Non-destructive testing - Penetrant testing - Part 4: Equipment
- ISO 3452-5, Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 °C
- ISO 3452-6, Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 °C
- ISO 12706, Non-destructive testing - Penetrant testing - Vocabulary
- ISO 23277, Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels
- European Committee for Standardization (CEN)
- EN 571-1, Non-destructive testing - Penetrant testing - Part 1: General principles. May be replaced by EN ISO 3452-1.
- EN 1371-1, Founding - Liquid penetrant inspection - Part 1: Sand, gravity die and low pressure die castings
- EN 1371-2, Founding - Liquid penetrant inspection - Part 2: Investment castings
- EN 2002-16, Aerospace series - Metallic materials; test methods - Part 16: Non-destructive testing, penetrant testing
- EN 10228-2, Non-destructive testing of steel forgings - Part 2: Penetrant testing
- EN 10246-11, Non-destructive testing of steel tubes - Part 11: Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections
- ASTM International (ASTM)
- ASTM E 165, Standard Practice for Liquid Penetrant Examination for General Industry
- ASTM E 1417, Standard Practice for Liquid Penetrant Testing
- American Society of Mechanical Engineers (ASME)
- ASME Boiler and Pressure Vessel Code, Section V, Art. 6, Liquid Penetrant Examination
- ASME Boiler and Pressure Vessel Code, Section V, Art. 24 Standard Test Method for Liquid Penetrant Examination SE-165 (identical with ASTM E-165)
Read more about this topic: Dye Penetrant Inspection
Famous quotes containing the word standards:
“A generation which has passed through the shop has absorbed standards and ambitions which are not of those of spaciousness, and cannot get away from them. Everything with them is done as though for sale, and they naturally have in view the greatest possible benefit, profit and that end of the stuff that will make the best show.”
—Alexander Herzen (1812–1870)
“Measured by any standard known to science—by horse-power, calories, volts, mass in any shape,—the tension and vibration and volume and so-called progression of society were full a thousand times greater in 1900 than in 1800;Mthe force had doubled ten times over, and the speed, when measured by electrical standards as in telegraphy, approached infinity, and had annihilated both space and time. No law of material movement applied to it.”
—Henry Brooks Adams (1838–1918)
“The technologist was the final guise of the white missionary, industrialization the last gospel of a dying race and living standards a substitute for a purpose in living.”
—Max Frisch (1911–1991)