Telecommunications Data Center Applications
As mentioned earlier, raised floors have been used in the past to support electronic equipment in a variety of applications. Raised floors available for use, however, do not address the special requirements needed for telecommunications applications.
The general types of raised floors in telecommunications data centers include stringerless, stringered, and structural platforms; and truss assemblies.
Stringerless Raised Floors - One type of raised floor generally consists of an array of pedestals that provide the necessary height for routing cables and also serve to support each corner of the floor panels.
Stringered Raised Floors - This type of raised floor generally consists of a vertical array of steel pedestal assemblies (each assembly comprises a steel base plate, tubular upright, and a head) uniformly spaced on 2-foot centers and mechanically fastened to the concrete floor.
Structural Platforms - A structural platform consists of members constructed of steel angles or channels that are welded or bolted together to form an integrated platform for supporting equipment.
Truss Assemblies - Truss-styled raised floors utilize attachment points to the subfloor to support a truss network on which the floor panels rest. The truss has high lateral strength and transfers lateral loads to the subfloor with less strain than possible with a vertical pedestal assembly.
A telecommunications facility may contain continuous lineups of equipment cabinets. The most densely populated installation configuration would consist of rows of continuous 2-foot-wide equipment cabinets with aisles that separate 2-footwide adjacent rows. This lineup configuration is considered to be the most densely populated in terms of square foot area and, therefore, the largest floor load anticipated for a raised floor system. Considering prorated aisle space, a single equipment cabinet will then occupy an 8-square foot (0.74-m2) floor area (4 square feet for the cabinet and 4 square feet of aisle).
The data center can be located in remote locations, and is subject to physical and electrical stresses from sources such as fires and from electrical faults.
The environment drives the installation methods for raised floors, including site preparation, cable and cable racking, bonding and grounding, and fire resistance. The actual installation should be in accordance with the customer’s practices. For more detailed information, see GR-1275-CORE, Central Office/Network Environment Equipment Installation/Removal Generic Requirements, and GR-3160-CORE, NEBS™ Requirements for Telecommunications Data Center Equipment and Spaces.
Read more about this topic: Raised Floor
Famous quotes containing the words data and/or center:
“This city is neither a jungle nor the moon.... In long shot: a cosmic smudge, a conglomerate of bleeding energies. Close up, it is a fairly legible printed circuit, a transistorized labyrinth of beastly tracks, a data bank for asthmatic voice-prints.”
—Susan Sontag (b. 1933)
“I am the center of the world, but the control panel seems to be somewhere else.”
—Mason Cooley (b. 1927)