Stabilator - Military

Military

All flying tailplanes were used from early times and in 1929 the de Havilland DH.77 offering for a Royal Air Force fighter used an all flying tail.

Stabilators were developed in response to the need to achieve adequate pitch control in supersonic flight, and are almost universal on modern military combat aircraft. All non-delta-winged supersonic aircraft use stabilators because with conventional control surfaces, shock waves can form past the elevator hinge, causing severe mach tuck.

The British wartime Miles M.52 supersonic project had stabilators though the design flew only as a scale rocket. The contemporary US supersonic project, the Bell X-1, adapted its variable incidence tailplane into an all-moving tailplane (based on Miles M.52 data) and was operated successfully. The North American Aviation F-86 Sabre, the first USAF aircraft which could go supersonic (although in a shallow dive) was introduced with a conventional horizontal stabilizer with elevators, which was eventually replaced with a stabilator.

Stabilators are also known in military terminology as all-moving or all-flying tailplanes. When stabilators can move differentially to perform the roll control function of ailerons, as they do on many modern fighter aircraft they become tailerons or rolling tails. A stabilator can also be mounted in front of the main wing in a canard configuration.

Stabilators on military aircraft have the same problem of overcontrol as general aviation aircraft. In older jet fighter aircraft, a resisting force was generated within the control system, either by springs or a resisting hydraulic force, rather than by an external anti-servo tab. For example in the F-100 Super Sabre, springs were attached to the control stick to provide increasing resistance to pilot input. In modern fighters, control inputs are moderated by computers ("fly by wire"), and there is no direct connection between the pilot's stick and the stabilator.