Process
The process heats sections of the vast oil shale field in situ, releasing the shale oil and oil shale gas from the rock so that it can be pumped to the surface and made into fuel. In this process, a freeze wall is first to be constructed to isolate the processing area from surrounding groundwater. To maximize the functionality of the freeze walls, adjacent working zones will be developed in succession. 2,000 feet (610 m) wells, eight feet apart, are drilled and filled with a circulating super-chilled liquid to cool the ground to −60 °F (−50 °C). Water is then removed from the working zone. Heating and recovery wells are drilled at 40 feet (12 m) intervals within the working zone. Electrical heating elements are lowered into the heating wells and used to heat oil shale to between 650 °F (340 °C) and 700 °F (370 °C) over a period of approximately four years. Kerogen in oil shale is slowly converted into shale oil and gases, which are then flow to the surface through recovery wells.
Read more about this topic: Shell In Situ Conversion Process
Famous quotes containing the word process:
“Consumer wants can have bizarre, frivolous, or even immoral origins, and an admirable case can still be made for a society that seeks to satisfy them. But the case cannot stand if it is the process of satisfying wants that creates the wants.”
—John Kenneth Galbraith (b. 1908)
“Interior design is a travesty of the architectural process and a frightening condemnation of the credulity, helplessness and gullibility of the most formidable consumers—the rich.”
—Stephen Bayley (b. 1951)
“My advice to people today is as follows: If you take the game of life seriously, if you take your nervous system seriously, if you take your sense organs seriously, if you take the energy process seriously, you must turn on, tune in, and drop out.”
—Timothy Leary (b. 1920)