Road Surface Marking - Mechanical Markers

Mechanical Markers

Mechanical devices may be raised or recessed into the road surface, and either reflective or non-reflective. Most are permanent; some are movable.

• Cat's eye, invented by Percy Shaw in the 1930s, Cat's eyes equip most major routes in the British Isles. They consist of four reflective lenses mounted in a durable white rubber housing, two facing fore and two facing aft. The housing is mounted within a cast iron shoe, which the rubber housing sinks in to when driven over. This provides protection from snow ploughing and allows the lenses to be self-cleaning—they pass a rubber blade when depressed. The lenses are available in a variety of different colours, mainly white, yellow/orange, green, red, and blue.
• Botts' dots (low rounded white dots), named for the California Caltrans engineer Elbert Botts, who invented the epoxy that keeps them glued down, are one type of a mechanical non-reflective raised marker. Generally they are used to mark the edges of traffic lanes, frequently in conjunction with raised reflective markers. Botts' dots are also used across a travel lane to draw the drivers attention to the road. They are frequently used in this way to alert drivers to toll booths, school zones or other significant reduction of speed limit. They are normally only used in warm climates since snow plows usually remove them along with the snow.
• Rumble strips are commonly used for the same purpose. A rumble strip can be a series of simple troughs (typically 1 cm deep and 10 cm wide) that is ground out of the asphalt. Other alternatives, similar to the Botts' dots, use raised strips, painted or glued to the surface. Uses can be across the travel direction (to warn of hazards ahead) or along the travel direction (to warn of hazards of not staying within a specific lane). Their main way of function is creating a strong vibration when driven over that will alert a driver to various upcoming hazards both by sound and the physical vibration of the vehicle.
• Reflective markers are used as travel lane dividers, to mark the central reservation (median) or to mark exit slip-roads. Incorporating a raised retro-reflective element, they are typically more visible at night and in inclement weather than standard road marking lines. The color of markers varies depending on the country of use. Reflective markers are also referred to as raised pavement markers, road studs, and sometimes (generically) in the UK and Ireland as cat's eye, although this name refers to one particular brand of product. These markers can be used for other purposes such as marking the locations of fire hydrants (blue) or at gates of gated communities to indicate that emergency service vehicles have a code or device that allows them to open the gate. In the United Kingdom and elsewhere, raised markers are used to mark crosswalks (crossings) to assist the blind in crossing streets. In colder climates, reflective markers may be installed below ground using an elongated narrow triangle, cut into the road surface that allows the device to be installed below the road surface. Newer technology allows these to be placed above ground with snowplough-able rails that attempt to protect the reflective components from the snowplough blade.