Architecture and Communications
An RTU monitors the field digital and analog parameters and transmits data to the Central Monitoring Station. An RTU can be interfaced with the Central Station with different communication media (usually serial (RS232, RS485, RS422) or Ethernet). RTU can support standard protocols (Modbus, IEC 60870-5-101/103/104, DNP3, IEC 60870-6-ICCP, IEC 61850 etc.) to interface any third party software. In some control applications, RTUs drive high current capacity relays to a digital output (or "DO") board to switch power on and off to devices in the field. The DO board switches voltage to the coil in the relay, which closes the high current contacts, which completes the power circuit to the device. An RTU can monitor analog inputs of different types including 4 to 20 milliamperes (4–20 mA), 0–10 V., −2.5 to 2.5 V, 1–5 V etc.; the RTU or host system then translates this raw data into the appropriate units such as gallons of water left or temperature before presenting the data to the user via the HMI.
RTUs differ from programmable logic controllers (PLCs) in that RTUs are more suitable for wide geographical telemetry, often using wireless communications, while PLCs are more suitable for local area control (plants, production lines, etc.) where the system utilizes physical media for control. The IEC 61131 programming tool is more popular for use with PLCs, while RTUs often use proprietary programming tools.
Read more about this topic: Remote Terminal Unit
Famous quotes containing the word architecture:
“And when his hours are numbered, and the world
Is all his own, retiring, as he were not,
Leaves, when the sun appears, astonished Art
To mimic in slow structures, stone by stone,
Built in an age, the mad wind’s night-work,
The frolic architecture of the snow.”
—Ralph Waldo Emerson (1803–1882)