Starting Methods
Plasma cutters use a number of methods to start the arc. In some units, the arc is created by putting the torch in contact with the work piece. Some cutters use a high voltage, high frequency circuit to start the arc. This method has a number of disadvantages, including risk of electrocution, difficulty of repair, spark gap maintenance, and the large amount of radio frequency emissions. Plasma cutters working near sensitive electronics, such as CNC hardware or computers, start the pilot arc by other means. The nozzle and electrode are in contact. The nozzle is the cathode, and the electrode is the anode. When the plasma gas begins to flow, the nozzle is blown forward. A third, less common method is capacitive discharge into the primary circuit via a silicon controlled rectifier.
Read more about this topic: Plasma Cutting
Famous quotes containing the words starting and/or methods:
“He was at a starting point which makes many a man’s career a fine subject for betting, if there were any gentlemen given to that amusement who could appreciate the complicated probabilities of an arduous purpose, with all the possible thwartings and furtherings of circumstance, all the niceties of inward balance, by which a man swings and makes his point or else is carried headlong.”
—George Eliot [Mary Ann (or Marian)
“There are souls that are incurable and lost to the rest of society. Deprive them of one means of folly, they will invent ten thousand others. They will create subtler, wilder methods, methods that are absolutely DESPERATE. Nature herself is fundamentally antisocial, it is only by a usurpation of powers that the organized body of society opposes the natural inclination of humanity.”
—Antonin Artaud (1896–1948)