Compact Transmission Lines
A compact overhead transmission line requires a smaller right of way than a standard overhead powerline. Conductors must not get too close to each other. This can be achieved either by short span lengths and insulating crossbars, or by separating the conductors in the span with insulators. The first type is easier to build as it does not require insulators in the span, which may be difficult to install and to maintain. Examples of compact lines are:
- Lutsk Compact Overhead Powerline 50°46′29″N 25°23′07″E / 50.7746732°N 25.3852147°E / 50.7746732; 25.3852147 (Startpoint of Lutsk Compact Overhead Powerline)
- Hilpertsau-Weisenbach Powerline 48°44′16″N 8°21′20″E / 48.7378978°N 8.3556604°E / 48.7378978; 8.3556604 (Startpoint of Hilpertsau-Weisenbach Powerline)
- http://vk.com/photo-9056086_270624590 - picture of a compact overhead powerline
Compact transmission lines may be designed for voltage upgrade of existing lines to increase the power that can be transmitted on an existing right of way.
Read more about this topic: Overhead Power Line
Famous quotes containing the words compact and/or lines:
“The powers of the federal government ... result from the compact to which the states are parties, [and are] limited by the plain sense and intention of the instrument constituting that compact.”
—James Madison (1751–1836)
“I need not tell you of the inadequacy of the American shipping marine on the Pacific Coast.... For this reason it seems to me that there is no subject to which Congress can better devote its attention in the coming session than the passage of a bill which shall encourage our merchant marine in such a way as to establish American lines directly between New York and the eastern ports and South American ports, and both our Pacific Coast ports and the Orient and the Philippines.”
—William Howard Taft (1857–1930)