Homologous temperature expresses the temperature of a material as a fraction of its melting point temperature using the Kelvin scale. For example, the homologous temperature of lead at room temperature is approximately 0.50 (TH = T/Tmp = 298K/601K = 0.50).
Solder (Tmp: 183°C = 456K) at 0.85Tmp or 115°C (= 388K), would thus be expected to have comparable properties to copper (Tmp: 1085°C = 1358K) at 0.85Tmp or 881°C (= 1154K).
In electronics applications, where circuits typically operate over a –55°C to +125°C range, eutectic tin-lead (Sn63) solder is working at 0.48Tmp to 0.87Tmp. The upper temperature is high relative to the melting point; from this we can deduce that solder will have limited mechanical strength (as a bulk material) and significant creep under stress. This is borne out by its comparatively low values for tensile strength, shear strength and modulus of elasticity.
Copper, on the other hand, has a much higher melting point, so foils are working at only 0.16Tmp to 0.29Tmp, and their properties are little affected by temperature.
| This standards- or measurement-related article is a stub. You can help Wikipedia by expanding it. |
Famous quotes containing the word temperature:
“This pond never breaks up so soon as the others in this neighborhood, on account both of its greater depth and its having no stream passing through it to melt or wear away the ice.... It indicates better than any water hereabouts the absolute progress of the season, being least affected by transient changes of temperature. A severe cold of a few days’ duration in March may very much retard the opening of the former ponds, while the temperature of Walden increases almost uninterruptedly.”
—Henry David Thoreau (1817–1862)