Rate-of-rise Heat Detectors
Rate-of-Rise (ROR) heat detectors operate on a rapid rise in element temperature of 120° to 150°F (67° to 83°C) increase per minute, irrespective of the starting temperature. This type of heat detector can operate at a lower temperature fire condition than would be possible if the threshold were fixed. It has two heat-sensitive thermocouples/ thermistor. One thermocouple monitors heat transferred by convection or radiation. The other responds to ambient temperature. Detector responds when first’s temperature increases relative to the other.
Rate of rise detectors may not respond to low energy release rates of slowly developing fires. To detect slowly developing fires combination detectors add a fixed temperature element that will ultimately respond when the fixed temperature element reaches the design threshold.
Read more about this topic: Heat Detector
Famous quotes containing the words heat and/or detectors:
“To say nothing is out here is incorrect; to say the desert is stingy with everything except space and light, stone and earth is closer to the truth.”
—William Least Heat Moon [William Trogdon] (b. 1939)
“There were metal detectors on the staff-room doors and Hernandez usually had a drawer full of push-daggers, nunchuks, stun-guns, knucks, boot-knives, and whatever else the detectors had picked up. Like Friday morning at a South Miami high school.”
—William Gibson (b. 1948)