Applications
Grog is used in pottery and sculpture to add a gritty, rustic texture called "tooth"; it also reduces shrinkage and aids even drying. This prevents defects such as cracking, crow feet patterning, and lamination. The coarse particles open the green clay body to allow gases to escape. It also adds structural strength to hand-built and thrown pottery during shaping although it can diminish fired strength.
The finer the grog particles are, the closer the clay bond, and the denser and stronger the resulting fired product. "The strength in the dry state increases with grog down as fine as that passing the 100-mesh sieve, but decreases with material passing the 200-mesh sieve. "
Other uses for grog is processing ZnO Metal Oxide Varistor (MOV). It is put at the base of the "blocks" on the topside of the bottom of a refractory sagger to keep the blocks from sticking to the sagger. This is because ZnO MOV has a polymer binder that upon drying acts as a glue. The grog at the base prevents gluing and acts as a vent for carbon gases while drying and sintering. The grog is a gritty form of ZnO to prevent contamination.
Read more about this topic: Grog (clay)