Gas Holder - Gas Holder Types

Gas Holder Types

There are two basic types of gasholder, rigid waterless and telescoping. Rigid waterless gas holders were a very early design which showed no sign of expansion or contraction. There are modern versions of the waterless gas holder, e.g. oil-sealed, grease-sealed and "dry seal" (membrane) types.

Telescoping holders fall into two subcategories. The earlier of the telescoping variety were column guided variations and were built in Victorian times. To guide the telescoping walls, or "lifts", they have an external fixed frame, visible at a fixed height at all times. Spiral guided gasholders were built in the UK up until 1983. These have no frame and each lift is guided by the one below, rotating as it goes up as dictated by helical runners.

Both telescoping types use the manometric property of water to provide a seal. The whole tank floats in a circular or annular water reservoir, held up by the roughly constant pressure of a varying volume of gas, the pressure determined by the weight of the structure, and the water providing the seal for the gas within the moving walls. Besides storing the gas, the tank's design serves to establish the pressure of the gas system. With telescoping (multiple lift) tanks, the innermost tank has a ~1ft wide by 2ft high lip around the outside of the bottom edge, called a cup, which picks up water as it rises above the reservoir water level. This immediately engages a downward lip on the inner rim of the next outer lift, called a grip, and as this grip sinks into the cup, it preserves the water seal as the inner tank continues to rise until the grip grounds on the cup, whereupon further injection of gas will start to raise that lift as well. Holders were built with as many as four lifts.

• Column guided gas holder at Cross Gates, Leeds This is the first of a former twin holder station constructed around 1900

• Another view of the gas holder at Cross Gates, Leeds

• Spiral guided gasholders at the former Meadow Lane Gas Works in Hunslet, Leeds. These were constructed around 1965

• Gasometer at Bernau bei Berlin Germany

• Various forms of gas storage seen in Germany