In cinematography, full frame refers to the use of the full film gate at maximum width and height for 35 mm film cameras. It is sometimes also referred to as silent aperture, full gate, or a number of other similar word combinations. It is the original gate size pioneered by William Dickson and Thomas Edison in 1892 and first used in the short film Blacksmithing Scene. Full frame is generally used by all 4-perf films, whether silent, standard 35 (Academy ratio width), or Super 35. The introduction of Academy ratio in 1932 required that the lens mount needed to be shifted slightly horizontally to re-center the lens at the new center of frame; however, the gate size did not change as the extra negative information would be cropped out by lab processes in post-production. 4-perf Super 35 is nearly identical to the original full frame standard, although the lens mount requires vertical re-centering when common topline extraction is used. It should also be noted that hard mattes for all common ratios exist and either replace the film gate itself or are inserted within it. However, these are usually not used in the event that any reframing needs to be done.
Read more about Full Frame: Technical Specifications
Famous quotes containing the words full and/or frame:
“Sometimes we sailed as gently and steadily as the clouds overhead, watching the receding shores and the motions of our sail; the play of its pulse so like our own lives, so thin and yet so full of life, so noiseless when it labored hardest, so noisy and impatient when least effective; now bending to some generous impulse of the breeze, and then fluttering and flapping with a kind of human suspense.”
—Henry David Thoreau (1817–1862)
“Writing a novel is not merely going on a shopping expedition across the border to an unreal land: it is hours and years spent in the factories, the streets, the cathedrals of the imagination.”
—Janet Frame (b. 1924)