Reciprocating Engines
Diesel engine generator sets are often used for prime power in communities not connected to a widespread power grid. Emergency (standby) power systems may use reciprocating internal combustion engines operated by fuel oil or natural gas. Standby generators may serve as emergency power for a factory or data center, or may also be operated in parallel with the local utility system to reduce peak power demand charge from the utility. Diesel engines can produce strong torque at relatively low rotational speeds, which is generally desirable when driving an alternator, but diesel fuel in long-term storage can be subject to problems resulting from water accumulation and chemical decomposition. Rarely used generator sets may correspondingly be installed as natural gas or LPG to minimize the fuel system maintenance requirements.
Spark-ignition internal combustion engines operating on gasoline (petrol), propane, or LPG are commonly used as portable temporary power sources for construction work, emergency power, or recreational uses.
Reciprocating external combustion engines such as the Stirling engine can be run on a variety of fossil fuels, as well as renewable fuels or industrial waste heat. Installations of Stirling engines for power production are relatively uncommon.
Read more about this topic: Fossil-fuel Power Station
Famous quotes containing the word engines:
“America is like one of those old-fashioned six-cylinder truck engines that can be missing two sparkplugs and have a broken flywheel and have a crankshaft that’s 5000 millimeters off fitting properly, and two bad ball-bearings, and still runs. We’re in that kind of situation. We can have substantial parts of the population committing suicide, and still run and look fairly good.”
—Thomas McGuane (b. 1939)