Production
The history of the finger joint is believed to have begun with wooden produce boxes or crates. Finger joints were originally cut by hand with saws and sharp chisels. In modern times they are easily and quickly made with a table saw or router and a jig or fixture, which can be shop-made or purchased from a specialty woodworking supply store. A finger joint jig typically consists of a moving fence with an indexing pin that is used to evenly space out the cuts. The fence is moved over a cutting blade making a cut that is then moved over the indexing pin so the next cut can be made.
While it is relatively easy to make using computer aided manufacture, a table saw or a wood router with a simple jig, some common problems include:
- Tear out on the back side
- If using a table saw, the top of the joint may not be exactly flat, depending on the tooth set of the blade
- Spacing problems and difficulty dialing in the exact index
Read more about this topic: Finger Joint
Famous quotes containing the word production:
“The repossession by women of our bodies will bring far more essential change to human society than the seizing of the means of production by workers.”
—Adrienne Rich (b. 1929)
“The development of civilization and industry in general has always shown itself so active in the destruction of forests that everything that has been done for their conservation and production is completely insignificant in comparison.”
—Karl Marx (1818–1883)
“An art whose limits depend on a moving image, mass audience, and industrial production is bound to differ from an art whose limits depend on language, a limited audience, and individual creation. In short, the filmed novel, in spite of certain resemblances, will inevitably become a different artistic entity from the novel on which it is based.”
—George Bluestone, U.S. educator, critic. “The Limits of the Novel and the Limits of the Film,” Novels Into Film, Johns Hopkins Press (1957)