Mold Making
The fiberglass mold process begins with an object known as the plug or buck. This is an exact representation of the object to be made, and can be made from a variety of different materials. Certain types of foam are commonly used.
After the plug has been formed, it is sprayed with a mold release agent. The release agent will allow the mold to be separated from the plug once it is finished. The mold release agent is a special wax, and/or PVA (Polyvinyl alcohol). Polyvinyl Alcohol, however, is said to have negative effects on the final mold's surface finish.
Once the plug has its release agent applied, gelcoat is applied with a roller, brush or specially-designed spray gun. The gelcoat is pigmented resin, and gives the mold surface a harder, more durable finish.
Once the release agent and gelcoat are applied, layers of fiberglass and resin are laid-up onto the surface. The fiberglass used will typically be identical to that which will be used in the final product.
In the laying-up process, a layer of fiberglass mat is applied, and resin is applied over it. A special roller is then used to remove air bubbles. If left in the curing resin, air bubbles would significantly reduce the strength of the finished mold. The fiberglass spray lay-up process is also used to produce molds, and can provide good filling of corners and cavities where a glass mat or weave may prove to be too stiff.
Once the final layers of fiberglass are applied to the mold, the resin is allowed to set up and cure. Wedges are then driven between the plug and the mold in order to separate the two.
Advanced techniques such as Resin Transfer Molding are also used.
Read more about this topic: Fiberglass Molding
Famous quotes containing the words mold and/or making:
“Death is an incident producing clay. Use it, mold it, learn from it.”
—John Gilling, British screenwriter. Dr. Knox (Peter Cushing)
““Hello, Arthur. This is your mother. Do you remember me? . . . Someday you’ll get married and have children of your own and Honey, when you do, I only pray that they’ll make you suffer the way you’re making me. That’s a Mother’s Prayer.””
—Mike Nichols (20th century)