Fiat 850 - Variants

Variants

The 850 family included several body styles with similar technical components underneath.

• Fiat 850 Special — Revised version of the 850 sedan, launched in 1968. It shared the 47 hp (35 kW) engine of 850 Coupé, and offered front disc brakes, sport steering wheel and improved trim. With a 25 percent increase in power, plus disc brakes nestled behind 13" wheels, it was a "sport sedan" in the vein of the BMW 2002, albeit on a smaller scale.

• Fiat 850 Familiare — The Familiare was a boxier and slightly larger heir to the Fiat 600 Multipla. It featured space for seven passengers in three rows, which made it suitable for groups including children and thin adults. It was too small to accommodate in comfort seven large adults.

The 850 Familiare continued in production till 1976 long after the saloon version of the 850 had been replaced by the Fiat 127. In 1976 the Fiat 900T was introduced, retaining most of the body panels of the 850 Familiare, but featuring the 903 cc engine from the Fiat 127 (although, in this application, still mounted behind the rear axle): the 900T benefitted from significant enhancements in 1980, being now renamed 900E. Production finally ended in 1985.

• Fiat 850 Coupé/Sedan — The Coupé was introduced for the first time 1965 on the Geneva Motor Show and had the original 843 cc engine tuned to produce 47 hp (35 kW). The maximum speed at that time was 135 km/h (84 mph).

• Fiat 850 Spider — At the same time as the Coupé/Sedan, Fiat also introduced the convertible sporty two-seater Spider, with the original 843 cc engine tuned to produce 49 hp (37 kW) which allowed it to reach a top speed of 145 km/h (90 mph). The body was designed and built by Bertone. The folding roof section made of fabric could be stowed away completely under a rear flap. The Bertone design also featured smooth, essential lines and simple yet elegant details, such as the recessed headlamps equipped with tilted plexiglass covers to follow the lines of the wings, and the dihedral side panels inspired by Bertone's 1963 Corvair Testudo.This engine ran counterclockwise, a unique feature compared to other engines.

At the time of their introduction into the United States the Sedan, Coupé, and Spider were marketed with a reduced capacity, high compression 817 cc (49.8 ci) engine in order to beat US emissions regulations at the time which applied only to engines equal to or larger than 50 cubic inches. Compression was raised from 8.8:1 to 9.2:1, requiring premium octane fuel.

In order to separate the sportier variants Coupé and Spider from the basic version, apart from the increase of engine performance, the equipment was also extended and adapted to the higher expectations. Both received sport seats, a sport steering wheel and round speedometer; Spider even received a completely rearranged instrument panel. The front drum brakes were replaced with disc brakes, although drum brakes remained on the rear wheels.

Abarth produced a tuned version of the Spider, known as the Fiat Abarth OT 1000 Spider. With engine displacement increased to 982 cc, it produced 61 hp (45 kW) and 58 lb·ft (79 N·m) of torque.

In 1968, Fiat revised the successful Spider and Coupé again and gave them an even stronger engine with 903 cc and 52 hp (39 kW). They were called Sport Spider and Sport Coupé. The Sport Spider body stayed essentially the same, but with a restyled front. The headlamps were moved forward slightly and the plastic covers were eliminated giving the car a "frogeye" look, and the original flush front turn indicators were replaced with units hung below the bumper. Several limited special edition versions of the Spider were offered, including the Racer featuring a body colored metal hard top and the Racer Berlinetta featuring a black vinyl hard top.

There was a transporter model as a successor of the Fiat 600 Multipla, which was later renamed to 900T and likewise received the larger capacity of 903 cc.

The production of the Coupés was stopped in 1971, of the sedan in 1972, and of the Spiders in 1973, after altogether nearly 2.3 million models were sold worldwide. Under the name SEAT 850, it was however further produced for some years in Spain, also in a four-door variant. As a successor the Fiat 127 was brought to the market in 1971 which combined the 903 cc push-rod OHV engine with the FIAT 128 transmission and suspension components in a fashionable fast- and later hatch-back 2-door sedan.

The Fiat 850 was also produced under the name Pirin-Fiat in Lovech, Bulgaria, on the basis of complete knock down (CKD) kits between 1967 and 1971.

Between 1978 and 1983, the U.S. government issued a highly unusual recall for the Fiat 850—going back 10 years—for rust problems.

In 1967, Road & Track called the Fiat 850 coupe "one of the handsomest, best-balanced designs ever seen on a small car."