EWR VJ 101 - Design and Development

Design and Development

Heinkel and Messerschmitt had developed designs to meet the requirements of VTOL flight and by 1959, the two companies, along with Bölkow, had created a joint venture company called EWR, to build the VJ 101 C. The new proposal merged the characteristics of earlier Bölkow, Heinkel and Messerschmitt designs into a sleek, streamlined platform. The VJ 101 was similar in appearance to the Bell XF-109, both with rotating engines in nacelles at the wingtips. In addition to the wingtip engines, two further lift jets were installed in the fuselage to supplement the main engines in hovering flight.

In order to test the concept, EWR built a test rig called the Wippe (seesaw) in early 1960. The simple device incorporated a rudimentary cockpit on a horizontal beam with a "lift" engine mounted vertically at the centre for preliminary single-axis tests of the control system. A later "hover rig" was built that had the skeletal fuselage of the VJ 101C with three Rolls-Royce RB108 engines installed in the approximate positions they would occupy in the final flying version. The small engines each had 2,100 lbf (9.3 kN) thrust, enough to lift the test rig. After initial testing in May 1961 from a telescopic column, the new rig was able to "fly" in free flight in March 1962. Additional tests with a cloth "skin" simulating fuselage and wings proved to be successful (showing satisfactory control in all seasons and weather conditions).