Ethernet Cables
Ethernet over twisted pair technologies use twisted-pair cables for the physical layer of an Ethernet computer network. Other Ethernet cable standards employ coaxial cable or optical fiber. Early versions developed in the 1980s included StarLAN followed by 10BASE-T. By the 1990s, fast, inexpensive technologies began to emerge. Currently the most popular are 100BASE-TX (fast Ethernet) and 1000BASE-T (gigabit Ethernet), running at 100 Mbit/s and 1000 Mbit/s (1 Gbit/s), respectively. These standards all use 8P8C connectors. Meanwhile higher-speed implementations generally support lower-speed standards inclusively; thus it is possible to mix different generations of equipment. Inclusive capability is designated 10/100 or 10/100/1000- for connections that support such combinations. The cables usually have four pairs of wires (though 10BASE-T and 100BASE-TX only require two of the pairs). The three standards support both full-duplex and half-duplex communication.
Read more about Ethernet Cables: History, Naming, Cabling, Autonegotiation and Duplex Mismatch, Variants
Famous quotes containing the word cables:
“It is not a piece of fine feminine Spitalfields silk—but is of the horrible texture of a fabric that should be woven of ships’ cables & hausers. A Polar wind blows through it, & birds of prey hover over it. Warn all gentle fastidious people from so much as peeping into the book—on risk of a lumbago & sciatics.”
—Herman Melville (1819–1891)