Drilling Fluid - Compliance Engineer

Compliance Engineer

The compliance engineer is the most common name for a relatively new position in the oil field, emerging around 2002 due to new environmental regulations on synthetic mud in the United States. Previously, synthetic mud was regulated the same as water-based mud and could be disposed of in offshore waters due to low toxicity to marine organisms. New regulations restrict the amount of synthetic oil that can be discharged. These new regulations created a significant burden in the form of tests needed to determine the "ROC" or retention on cuttings, sampling to determine the percentage of crude oil in the drilling mud, and extensive documentation. It should be noted that no type of oil/synthetic based mud (or drilled cuttings contaminated with OBM/SBM) may be dumped in the North Sea. Contaminated mud must either be shipped back to shore in skips or processed on the rigs.

A new monthly toxicity test is also now performed to determine sediment toxicity, using the amphipod Leptocheirus plumulosus. Various concentrations of the drilling mud are added to the environment of captive L. plumulosus to determine its effect on the animals. The test is controversial for two reasons:

1. These animals are not native to many of the areas regulated by them, including the Gulf of Mexico
2. The test has a very large standard deviation and samples that fail badly may pass easily upon retesting