Continuous casting, also called strand casting, is the process whereby molten metal is solidified into a "semifinished" billet, bloom, or slab for subsequent rolling in the finishing mills. Prior to the introduction of continuous casting in the 1950s, steel was poured into stationary molds to form ingots. Since then, "continuous casting" has evolved to achieve improved yield, quality, productivity and cost efficiency. It allows lower-cost production of metal sections with better quality, due to the inherently lower costs of continuous, standardised production of a product, as well as providing increased control over the process through automation. This process is used most frequently to cast steel (in terms of tonnage cast). Aluminium and copper are also continuously cast.
Sir Henry Bessemer, of Bessemer converter fame, received a patent in 1857 for casting metal between two contra-rotating rollers. The basic outline of this system has recently been implemented today in the casting of steel strip.
Read more about Continuous Casting: Equipment and Process, Startup, Control of The Process and Problems, Starter Bar, Direct Strip Casting
Famous quotes containing the words continuous and/or casting:
“I describe family values as responsibility towards others, increase of tolerance, compromise, support, flexibility. And essentially the things I call the silent song of life—the continuous process of mutual accommodation without which life is impossible.”
—Salvador Minuchin (20th century)
“For the gods, though slow to see, see well, whenever a man casting aside worship turns folly.”
—Sophocles (497–406/5 B.C.)