The concrete slump test is an empirical test that measures the workability of fresh concrete.
More specifically, it measures the consistency of the concrete in that specific batch. This test is performed to check the consistency of freshly made concrete. Consistency is a term very closely related to workability. It is a term which describes the state of fresh concrete. It refers to the ease with which the concrete flows. It is used to indicate the degree of wetness. Workability of concrete is mainly affected by consistency i.e. wetter mixes will be more workable than drier mixes, but concrete of the same consistency may vary in workability. It is also used to determine consistency between individual batches.
The test is popular due to the simplicity of apparatus used and simple procedure. Unfortunately, the simplicity of the test often allows a wide variability in the manner that the test is performed. The slump test is used to ensure uniformity for different batches of similar concrete under field conditions, and to ascertain the effects of plasticizers on their introduction. In India this test is conducted as per IS specification.
Read more about Concrete Slump Test: Principle, Apparatus, Procedure, Interpretation of Results, Limitations of The Slump Test, Differences in Standards, Other Tests
Famous quotes containing the words concrete and/or test:
“To step over the low wall that divides
Road from concrete walk above the shore
Brings sharply back something known long before
The miniature gaiety of seasides.”
—Philip Larkin (1922–1986)
“It is commonly said ... that ridicule is the best test of truth; for that it will not stick where it is not just. I deny it. A truth learned in a certain light, and attacked in certain words, by men of wit and humour, may, and often doth, become ridiculous, at least so far, that the truth is only remembered and repeated for the sake of the ridicule.”
—Philip Dormer Stanhope, 4th Earl Chesterfield (1694–1773)