Coal Bed Methane Extraction - Areas With Coal Bed Methane Extraction

Areas With Coal Bed Methane Extraction

This process has resulted in the drilling of tens of thousands of gas wells, and extensive support facilities such as roads, pipelines, and compressors.

The use of this method is currently expanding in the Powder River Basin of northeast Wyoming and southeast Montana. Seven percent of the natural gas (methane) currently produced in the United States comes from CBM extraction. Methane from coalbed reservoirs can be recovered economically, but disposal of water is an environmental concern.

Most gas in coal is stored on the internal surfaces of organic matter. Because of its large internal surface area, coal stores 6 to 7 times more gas than the equivalent rock volume of a conventional gas reservoir. Gas content generally increases with coal rank, with depth of burial of the coalbed, and with reservoir pressure. Fractures, or cleats, that permeate coalbeds are usually filled with water; the deeper the coalbed, the less water is present, but the more saline it becomes. In order for gas to be released from the coal, its partial pressure must be reduced, and this is accomplished by removing water from the coalbed. Large amounts of water, sometimes saline, are produced from coalbed methane wells, especially in the early stages of production. While economic quantities of methane can be produced, water disposal options that are environmentally acceptable and yet economically feasible, are a concern. Water may be discharged on the surface if it is relatively fresh, but, often, it is injected into rock at a depth where the quality of the injected water is less than that of the host rock. Another alternative, not yet attempted, is to evaporate the water and collect the potentially saleable solid residues; this scheme might be feasible in regions having high evaporation rates.