BSSAP
GSM 08.06 http://www.etsi.fr
The MTP and the SCCP are used to support signalling messages between the Mobile Services Switching Center (MSC) and the Base Station System (BSS). One user function of the SCCP, called BSS Application Part (BSSAP) is defined. In the case of point-to-point calls the BSSAP uses one signalling connection per active mobile station having one or more active transactions for the transfer of layer 3 messages. In the case of a voice group or broadcast call there is always one connection per cell involved in the call and one additional connection per BSS for the transmission of layer 3 messages. There is an additional connection for the speaker in a broadcast call or the first speaker in a voice group call up to the point at which the network decides to transfer them to a common channel. Additional connections may also be required for any mobile stations in the voice group or broadcast call which the network decides to place on a dedicated connection. The BSSAP user function is further subdivided into two separate functions:
The Direct Transfer Application sub-Part (DTAP), also called GSM L3, is used to transfer messages between the MSC and the MS (Mobile Station); the layer-3 information in these messages is not interpreted by the BSS. The descriptions of the layer 3 protocols for the MS-MSC information exchange are contained in the 04- series of GSM Technical Specifications. The BSS Management Application sub-Part (BSSMAP) supports other procedures between the MSC and the BSS related to the MS (resource management, handover control), or to a cell within the BSS, or to the whole BSS. The description of the layer 3 protocol for the BSSMAP information exchange is contained in Recommendation GSM 08.08. Both connectionless and connection-oriented procedures are used to support the BSSMAP. Rec. GSM 08.08 explains whether connection oriented or connectionless services should be used for each layer 3 procedure. Connection oriented procedures are used to support the DTAP. A distribution function located in BSSAP, which is reflected in the protocol specification by the layer 3 header, performs the discrimination between the data related to those two subparts.
Discrimination Distribution between the two sub-protocols: BSSMAP and DTAP.
Read more about this topic: Cellular Data Communication Protocol