Heat-treatable Alloys
Alloys are often made to alter the mechanical properties of the base metal, to induce hardness, toughness, ductility, or other desired properties. Most metals and alloys can be work hardened by creating defects in their crystal structure. These defects are created during plastic deformation, such as hammering or bending, and are permanent unless the metal is recrystallized. However, some alloys can also have their properties altered by heat treatment. Nearly all metals can be softened by annealing, which recrystallizes the alloy and repairs the defects, but not as many can be hardened by controlled heating and cooling. Many alloys of aluminium, copper, magnesium, titanium, and nickel can be strengthened to some degree by some method of heat treatment, but few respond to this to the same degree that steel does.
At a certain temperature, (usually between 1,500 °F (820 °C) and 1,600 °F (870 °C)), the base metal of steel (iron) undergoes a change in the arrangement of the atoms in its crystal matrix, called allotropy. This allows the small carbon atoms to enter the interstices of the crystal, diffusing into the iron matrix. When this happens, the carbon atoms are said to be in solution, or mixed with the iron, forming a single, homogeneous, crystalline phase called austenite. If the steel is cooled slowly, the iron will gradually change into its low temperature allotrope. When this happens the carbon atoms will no longer be soluble with the iron, and will be forced to precipitate out of solution, nucleating into the spaces between the crystals. The steel then becomes heterogeneous, being formed of two phases; the carbon (carbide) phase cementite, and ferrite (iron). However, if the steel is cooled quickly the carbon atoms will not have time to precipitate. When rapidly cooled, a diffusionless (martensite) transformation occurs, in which the carbon atoms become trapped in solution. This causes the iron crystals to deform intrinsically when the crystal structure tries to change to its low temperature state, inducing great hardness.
Conversely, most heat-treatable alloys are precipitation hardening alloys, which produce the opposite effects that steel does. When heated to form a solution and then cooled quickly, these alloys become much softer than normal, during the diffusionless transformation, and then harden as they age. The solutes in these alloys will precipitate over time, forming intermetallic phases, which are difficult to discern from the base metal. Unlike steel, in which the solid solution separates to form different crystal phases, precipitation hardening alloys separate to form different phases within the same crystal. These intermetallic alloys appear homogeneous in crystal structure, but tend to behave heterogeneous, becoming hard and somewhat brittle.
Read more about this topic: Alloy