Virtual Retinal Display - The Basic System

The Basic System

In a conventional display a real image is produced. The real image is either viewed directly or, as in the case with most head-mounted displays, projected through an optical system and the resulting virtual image is viewed. The projection moves the virtual image to a distance that allows the eye to focus comfortably. No real image is ever produced with the VRD. Rather, an image is formed directly on the retina of the user's eye. A block diagram of the VRD is shown in the Figure above.

To create an image with the VRD a photon source (or three sources in the case of a color display) is used to generate a coherent beam of light. The use of a coherent source (such as a laser diode) allows the system to draw a diffraction limited spot on the retina. The light beam is intensity modulated to match the intensity of the image being rendered. The modulation can be accomplished after the beam is generated. If the source has enough modulation bandwidth, as in the case of a laser diode, the source can be modulated directly.

The resulting modulated beam is then scanned to place each image point, or pixel, at the proper position on the retina. A variety of scan patterns are possible. The scanner could be used in a calligraphic (vector) mode, in which the lines that form the image are drawn directly, or in a raster mode, much like standard computer monitors or television. Use of the raster method of image scanning allows the VRD to be driven by standard video sources. To draw the raster, a horizontal scanner moves the beam to draw a row of pixels. The vertical scanner then moves the beam to the next line where another row of pixels is drawn.

After scanning, the optical beam must be properly projected into the eye. The goal is for the exit pupil of the VRD to be coplanar with the entrance pupil of the eye. The lens and cornea of the eye will then focus the beam on the retina, forming a spot. The position on the retina where the eye focuses the spot is determined by the angle at which light enters the eye. This angle is determined by the scanners and is continually varying in a raster pattern. The brightness of the focused spot is determined by the intensity modulation of the light beam. The intensity modulated moving spot, focused through the eye, draws an image on the retina. The eye's persistence allows the image to appear continuous and stable.

Finally, the drive electronics synchronize the scanners and intensity modulator with the incoming video signal in such a manner that a stable image is formed.