Interference
While not usually caused by the enemy, interference can greatly impede the ability of an operator to track. Interference occurs when two radars in relatively close proximity (how close they need to be depends on the power of the radars) are operating on the same frequency. This will cause "running rabbits", a visual phenomenon that can severely clutter up a scope with useless data. Interference is not that common between ground radars, however, because they are not usually placed close enough together. It is more likely that some sort of airborne radar system is inadvertently causing the interference—especially when two or more countries are involved.
The interference between airborne radars referred to above can sometimes (usually) be eliminated by frequency-shifting the magnetron.
The other interference often experienced is between the aircraft's own electronic transmitters, i.e. transponders, being picked up by own radar. This interference is eliminated by suppressing the radar's reception for the duration of the transponder's transmission. Instead of "bright-light" rabbits across the display, one would observe very small black dots. Because the external radar causing the transponder to respond is generally not synchronised with your own radar (i.e. different PRFs ), these black dots appear randomly across the display and the operator sees through and around them. The returning image may be much larger than the "dot" or "hole", as it has become known, anyway. Keeping the transponder's pulse widths very narrow and mode of operation (single pulse rather than multi-pulse) becomes a crucial factor.
The external radar could, in theory, come from an aircraft flying alongside your own, or from space. Another factor often overlooked is to reduce the sensitivity of one's own transponder to external radars; i.e., ensure that the transponder's threshold is high. In this way it will only respond to nearby radars—which, after all, should be friendly.
One should also reduce the power output of the transponder in like manner.
Read more about this topic: Radar Jamming And Deception
Famous quotes containing the word interference:
“The truth is, the whole administration under Roosevelt was demoralized by the system of dealing directly with subordinates. It was obviated in the State Department and the War Department under [Secretary of State Elihu] Root and me [Taft was the Secretary of War], because we simply ignored the interference and went on as we chose.... The subordinates gained nothing by his assumption of authority, but it was not so in the other departments.”
—William Howard Taft (1857–1930)
“Now for civil service reform. Legislation must be prepared and executive rules and maxims. We must limit and narrow the area of patronage. We must diminish the evils of office-seeking. We must stop interference of federal officers with elections. We must be relieved of congressional dictation as to appointments.”
—Rutherford Birchard Hayes (1822–1893)
“Adolescent girls were fighting a mother’s interference because they wanted her to acknowledge their independence. Whatever resentment they had was not towards a mother’s excessive concern, or even excessive control, but towards her inability to see, and appreciate, their maturing identity.”
—Terri Apter (20th century)