Uses
Below are some typical uses for proxy ARP:
- Joining a broadcast LAN with serial links (e.g., dialup or VPN connections).
- Assume an Ethernet broadcast domain (e.g., a group of stations connected to the same hub) using a certain IPv4 address range (e.g., 192.168.0.0/24, where 192.168.0.1 – 192.168.0.127 are assigned to wired nodes). One or more of the nodes is an access router accepting dialup or VPN connections. The access router gives the dial-up nodes IP addresses in the range 192.168.0.128 – 192.168.0.254; for this example, assume a dial-up node gets IP address 192.168.0.254.
- The access router uses Proxy ARP to make the dial-up node present in the subnet without being wired into the Ethernet: the access server 'publishes' its own MAC address for 192.168.0.254. Now, when another node wired into the Ethernet wants to talk to the dial-up node, it will ask on the network for the MAC address of 192.168.0.254 and find the access server's MAC address. It will therefore send its IP packets to the access server, and the access server will know to pass them on to the particular dial-up node. All dial-up nodes therefore appear to the wired Ethernet nodes as if they are wired into the same Ethernet subnet.
- Taking multiple addresses from a LAN
- Assume a station (e.g., a server) with an interface (10.0.0.2) connected to a network (10.0.0.0/24). Certain applications may require multiple IP addresses on the server. Provided the addresses have to be from the 10.0.0.0/24 range, the way the problem is solved is through Proxy ARP. Additional addresses (say, 10.0.0.230-10.0.0.240) are aliased to the loopback interface of the server (or assigned to special interfaces, the latter typically being the case with VMware/UML/jails/vservers/other virtual server environments) and 'published' on the 10.0.0.2 interface (although many operating systems allow direct allocation of multiple addresses to one interface, thus eliminating the need for such tricks).
- On a firewall
- In this scenario a firewall can be configured with a single IP address. One simple example of a use for this would be placing a firewall in front of a single host or group of hosts on a subnetwork. Example- A network (10.0.0.0/8) has a server which should be protected (10.0.0.20) a proxy-arp firewall can be placed in front of the server. In this way the server is put behind a firewall without making any changes to the network at all.
- Mobile-IP
- In case of Mobile-IP the Home Agent uses Proxy ARP in order to receive messages on behalf of the Mobile Node, so that it can forward the appropriate message to the actual mobile node's address (Care-of address).
- Transparent subnet gatewaying
- A setup that involves two physical segments sharing the same IP subnet and connected together via a router. This use is documented in RFC 1027.
Read more about this topic: Proxy ARP