Pole Building Framing - Walls

Walls

The walls of a pole building are normally built using 6×8 or 6×6 pressure treated posts. For a standard snow load of 40 to 50 pounds, the posts are spaced evenly from 8' to 12' apart down both sidewalls. Posts on the end walls are normally spaced to allow for doors and provide framing for the walls. The walls are connected using a girt system of 2×6 dimensional lumber normally spaced 24" apart up the outside of the posts connecting them together. Other girt systems include framing in between the posts rather than on the outer side of the posts.

Siding materials for a pole building are most commonly rolled-rib 29-gauge enameled metal cut to length in 32" or 36" widths attached using color-matched screws with rubber washers to seal the holes. However, any standard siding can be used, including T1-11, vinyl, lap siding, cedar, and even brick. Using sidings other than metal may require first installing sheeting, such as CDX, OSB, or Plywood.

Read more about this topic:  Pole Building Framing

Famous quotes containing the word walls:

    “The walls that fence our fields, as well as modern Rome, and not less the Parthenon itself, are all built of ruins.”
    —Henry David Thoreau (1817–1862)

    “Nor stony tower, nor walls of beaten brass,
    Nor airless dungeon, nor strong links of iron,
    Can be retentive to the strength of spirit.”
    —William Shakespeare (1564–1616)

    ““Home” is any four walls that enclose the right person.”
    —Helen Rowland (1875–1950)