Pole Building Framing

Pole framing and Pole building framing, commonly known as Pole building (from "Pole Barns" of "Pole buildings"), is a simple building technique adapted from the labor intensive post-and-beam construction technique that uses large poles (or squared off posts) as vertical structural members and strong "girts" parallel to the floor at right angles to the posts as the principle structural skeleton. The method was developed and matured during the 1930s when North American farms moved from animal power to internal combustion based machinery and the need for inexpensive farm building grew in consequence. Unlike competing building methods, once the poles, girts, and rafters are set up by a crew of a few people, much of the construction work on a pole-built structure can easily be handled by a single individual over the course of a period such as a month or a season.

When literal poles (debarked, delimbed tree trunk sections) are used, the girts and shims are used to square the structure for hanging the wall curtain around, normally a type of vertical hanging siding such as galvanized corrugated sheet steel or board and batten siding was traditional. The girts necessarily are substantial structural members as along any given wall they collectively must bear the weight of any exterior wall and all things hung from it, which on at least two walls includes part of the weight of the roof. In a modern pole built office building or other buildings requiring interior walls and subdivisions interior girts would usually also be added, each a bearing member, sharing and carrying the weight of interior walls and mountings to the posts. In animal husbandry, interior girts would better resist the thrust of jostling animals in a common pen. To add a second floor or loft, joists laid down at right angles to the girts readily make up a new floor level.

On two walls, usually the long wall, the heavy "beam" function of post and beam or "top plate" of platform framing methods is analogously performed by the heavier top girts (wider 2x lumber) of those walls. In the technique, the girts are through-bolted by large carriage bolts, and both an inner and outer girt are generally used to support the roof loading, which is frequently a truss roof supporting purlins, not stick built ridge board and rafter construction using rafters. When used, some rafters may be attached directly to the poles. Purlins might also be used when rafters are spaced farther apart, for in either case, purlins are like girts, oriented at right angles to the truss or rafters they cross, as well as the long sheet like metal roofing elements commonly used in roofing and siding Pole buildings.

The techniques originated in the pole barn, which was a quick and economical method of adding outbuildings on a farm as agriculture shifted to equipment dependent and capital intensive agriculture—necessitating sheltering tractors, harvesters, wagons and the like in much greater quantities and sizes. Around North America, many pole built structures are still readily seen in rural and industrial areas, for the galvanized steel siding and roofing of the thirties has proven to be very durable as was much of the shed style vertically oriented plank siding.

In modern developments the Pole Barns of the 30s have become "Pole Buildings" under the influence of new building materials such as inexpensive metal roof and siding products in stylish varieties and so today serve a more general purpose, such as housing, commercial use, or storage. In the process more often than not, the poles have become posts of squared off pressure treated timbers. These structures have the potential to replicate the functionality of other buildings, but they are more affordable and require less time to construct. The most common use for pole buildings is storage as it was on the farms, but today it is of automobiles or boats along with many other household items that would normally be found in a residential garage, or commercially as the surroundings for a light industry or small corporate offices with attached shops. The reason these buildings are so affordable is because they use a technique called Pole Framing.

The posts provide a strong vertical anchors and supports for attaching the shell of the building which is connected by bolted through girts running ribbon like horizontally like bands at different heights generally about two feet apart. The posts replace the studs commonly used in the more familiar platform framing construction techniques people see in housing. The exterior walls are indirectly attached to the outer edge of the posts onto girts which run around the building like wooden bands at the same fixed heights about two feet apart from where the upper girts support the roof and rafters at intervals about 2 feet on center to a bottom girt that is possibly under the sub-floor level supporting the rafters of a wooden floor. The roof is attached to the top girts (normally both) of the longer wall usually via a standard ridge beam and rafter or more commonly, using a truss system which can span longer distances and requires no interior posts and beams with modern tech.

When center posts are tolerable a more economic technique uses shed roofing and standard rafters being supported from the row of center posts (higher than wall end posts) that are necessary with ridge and rafter roof framing which needs building support near the centerline, but the ability to have two girts supporting the ends of the rafter below and slightly outside of the ridge board simplifies its construction and strengthens the roof. Further, extending that configuration by adding an intermediate row of poles collinear in height along the line lying between the height of the center and wall posts can be used to hang girts in the same plane as the line from the ridge board to the wall top girts. This in effect allows the building to use the same length rafter elements from post row to post row repeated as needed 'nn times' and extend such a roof a significantly allowing a deep building with a roof with many sub-structural elements all providing the same pitch.

Read more about Pole Building Framing:  History, Walls

Famous quotes containing the words pole, building and/or framing:

    This man was very clever and quick to learn anything in his line. Our tent was of a kind new to him; but when he had once seen it pitched, it was surprising how quickly he would find and prepare the pole and forked stakes to pitch it with, cutting and placing them right the first time, though I am sure that the majority of white men would have blundered several times.
    Henry David Thoreau (1817–1862)

    The Times are the masquerade of the eternities; trivial to the dull, tokens of noble and majestic agents to the wise; the receptacle in which the Past leaves its history; the quarry out of which the genius of today is building up the Future.
    Ralph Waldo Emerson (1803–1882)

    In framing a government which is to be administered by men over men ... you must first enable the government to control the governed; and in the next place oblige it to control itself.
    James Madison (1751–1836)