Intel launched its improved Pentium M, formerly known as Dothan, named after another ancient town in Israel, on May 10, 2004. Dothan Pentium M processors (product code 80536, CPUID 0x6DX) are among the first Intel processors to be identified using a "processor number" rather than a clockspeed rating, and the mainstream versions are known as Pentium M 710 (1.4 GHz), 715 (1.5 GHz), 725 (1.6 GHz), 735 (1.7 GHz), 740 (1.73 GHz), 745 (1.8 GHz), 750 (1.86 GHz), 755 (2.0 GHz), and 765 (2.1 GHz).
These 700 series Pentium M processors retain the same basic design as the original Pentium M, but are manufactured on a 90 nm process, with twice the secondary cache. Die size, at 84 mm2, remains in the same neighborhood as the original Pentium M, even though the 700 series contains approximately 140 million transistors, most of which make up the 2 MB cache. TDP is also down to 21 watts (from 24.5 watts in Banias), though power use at lower clockspeeds has increased slightly. However, tests conducted by third party hardware review sites show that Banias and Dothan equipped notebooks have roughly equivalent battery life. Additionally third party hardware review sites have benchmarked the Dothan at approx 10-20% better performance than the Banias in most situations.
Revisions of the Dothan core were released in the first quarter of 2005 with the Sonoma chipsets and supported a 533 MT/s FSB and XD (Intel's name for the NX bit) (and PAE support required for it was enabled, unlike earlier Pentium Ms that had it disabled). These processors include the 730 (1.6 GHz), 740 (1.73 GHz), 750 (1.86 GHz), 760 (2.0 GHz) and 770 (2.13 GHz). These models all have a TDP of 27 W and a 2 MB L2 cache.
In July 2005, Intel released the 780 (2.26 GHz) and the low-voltage 778 (1.60 GHz).
The processor line has models running at clock speeds from 1.0 GHz to 2.26 GHz as of July 2005. The models with lower frequencies were either low voltage or ultra-low voltage CPUs designed for even better battery life and reduced heat output. The 718 (1.3 GHz), 738 (1.4 GHz), and 758 (1.5 GHz) models are low-voltage (1.116 V) with a TDP of 10 W, while the 723 (1.0 GHz), 733 (1.1 GHz), and 753 (1.2 GHz) models are ultra-low voltage (0.940 V) with a TDP of 5 W.
Read more about this topic: Pentium M