International Organization For Standardization (ISO) Standards
International Organization for Standardization (ISO) has developed over 18500 standards and over 1100 new standards are published every year. The following is a partial list of the standards specific to welding:
Standard Number | Description |
---|---|
ISO 2553 | Welded, brazed and soldered joints - symbolic representation on drawings (1992) |
ISO 2560 | Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and fine grain steels. Classification |
ISO 3580 | Covered electrodes for manual arc welding of creep-resisting steels - Code of symbols for identification |
ISO 3581 | Covered electrodes for manual arc welding of stainless and other similar high alloy steels - Code of symbols for identification |
ISO 3834 | Quality requirements for fusion welding of metallic materials, five parts. |
ISO 4063 | Welding and allied processes - Nomenclature of processes and reference numbers |
ISO 5817 | Welding. Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded). Quality levels for imperfections |
ISO 6520-1 | Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 1: Fusion welding |
ISO 6520-2 | Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 2: Welding with pressure |
ISO 6947 | Welds. Working positions. Definitions of angles of slope and rotation |
ISO 9606 | Qualification test of welders — Fusion welding, parts 1 to 5 |
ISO 9692-1 | Welding and allied processes. Recommendations for joint preparation. Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels |
ISO 9692-2 | Welding and allied processes. Joint preparation. Submerged arc welding of steels |
ISO 9692-3 | Welding and allied processes. Joint preparation. Part 3: TIG and MIG welding of aluminium and its alloys |
ISO 13847 | Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines |
ISO 13916 | Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat mainteanance temperature |
ISO 13918 | Welding - Studs and ceramic ferrules for arc stud welding |
ISO 13919-1 | Welding - Electron and laser-beam welded joints - Guidance on quality level for imperfections - Part 1: Steel |
ISO 13919-2 | Welding - Electron and laser-beam welded joints - Guidance on quality level for imperfections - Part 2: Aluminium and its weldable alloys |
ISO 13920 | Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position |
ISO 14112 | Gas welding equipment - Small kits for gas brazing and welding |
ISO 14175 | Welding consumables — Gases and gas mixtures for fusion welding and allied processes. Replaced EN 439:1994 in Europe. |
ISO 14341 | Welding consumables. Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification |
ISO 14554 | Resistance welding |
ISO 14744 | Electron beam welding, six parts |
ISO 15607 | Specification and qualification of welding procedures for metallic materials - General rules |
ISO/TR 15608 | Welding - Guidelines for a metallic material grouping system |
ISO 15609 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification, five parts. |
ISO 15610 | Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables |
ISO 15611 | Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience |
ISO 15612 | Specification and qualification of welding procedures for metallic materials — Qualification by adoption of a standard welding procedure |
ISO 15613 | Specification and qualification of welding procedures for metallic materials — Qualification based on pre-production welding test |
ISO 15614 | Specification and qualification of welding procedures for metallic materials - Welding procedure test, 13 parts. |
ISO 17635 | Non-destructive testing of welds. General rules for metallic materials |
ISO/TR 20172 | Welding — Grouping systems for materials — European materials |
ISO/TR 20173 | Welding — Grouping systems for materials — American materials |
ISO/TR 20174 | Welding — Grouping systems for materials — Japanese materials |
Read more about this topic: List Of Welding Codes
Famous quotes containing the words organization and/or standards:
“The art of government is the organization of idolatry. The bureaucracy consists of functionaries; the aristocracy, of idols; the democracy, of idolaters. The populace cannot understand the bureaucracy: it can only worship the national idols.”
—George Bernard Shaw (18561950)
“Measured by any standard known to scienceby horse-power, calories, volts, mass in any shape,the tension and vibration and volume and so-called progression of society were full a thousand times greater in 1900 than in 1800;Mthe force had doubled ten times over, and the speed, when measured by electrical standards as in telegraphy, approached infinity, and had annihilated both space and time. No law of material movement applied to it.”
—Henry Brooks Adams (18381918)