Colt Canada C7 Rifle - C7 - C7A1

C7A1

The C7A1 (Diemaco C7FT) replaces the iron sight/carrying handle used on the C7 with a modified Weaver rail for mounting optics. Canadian development of rails preceded American standardization of the MIL-STD-1913 "Picatinny rail", so the "Canadian Rail" or "Diemaco Rail" differs slightly. There are 14 slots instead of 13 and each slot is narrower. The height of the rail is also lower, allowing the use of normal front sights (MIL-STD-1913 requires a different front sight assembly). During development, the original rails were vacuum-bonded to the top of a bare receiver. For production, the rail and receiver were made out of a single forging. The mount can use traditional iron sights or the ELCAN C79 Optical Sight 3.4× power optical sight, both of which can be adjusted for individual eye relief. The optical sight was designed for the C9 light machine gun and includes horizontal and vertical mil-bars used for range determination and deflection, and a tritium glow-in-the-dark aiming post rather than the traditional crosshairs. The 3.4× is powerful enough to properly see targets at the maximum accurate range of 400 m (440 yd), though like most magnified optical sights it is prone to criticism for creating tunnel vision in close quarters situations. While the wide aperture helps to speed target acquisition, Canadian soldiers generally forgo the C79 sight in favour of non-magnified optical sights or backup iron sights when engaged or training in close quarters battle. The front sight was changed to a round post 1.3 mm (0.05 in) in diameter, from the square post.