Method
There is great debate as to the best method for bull polishing, to a point where a 'lore' may be said to exist. Among techniques advocated are melting the polish, the addition of cigar ash to the polish, and substituting coffee for water or spit. However, the basic principles remain the same:
- Wear the item a few times to establish any natural creases that occur during use. This is particularly important if the leather has been "burnt down" with beeswax (a process that gives the leather a smoother finish).
- Polish the item in the normal way with a brush a few times to get a decent 'regular' polish.
- Apply thin layers of polish to the item in a circular motion until a dull, smooth shine appears.
- Polish the final layer of polish with a good quality wet cloth or wet cotton wool until the desired shine appears.
- Use little amounts of water, keep the shoe rag damp.
- Do not use too much polish, it will take a long time to polish and it doesn't give a very good shine.
Ultimately, the process involves polishing the applied thin layers of polish not the leather itself. The process can be lengthy and is best learned with practice.
| This military-related article is a stub. You can help Wikipedia by expanding it. |
Read more about this topic: Bull Polishing
Famous quotes containing the word method:
“There is assuredly no more effectual method of clearing up one’s own mind on any subject than by talking it over, so to speak, with men of real power and grasp, who have considered it from a totally different point of view.”
—Thomas Henry Huxley (1825–95)
“The method of scientific investigation is nothing but the expression of the necessary mode of working of the human mind. It is simply the mode in which all phenomena are reasoned about, rendered precise and exact.”
—Thomas Henry Huxley (1825–95)
“I know no method to secure the repeal of bad or obnoxious laws so effective as their stringent execution.”
—Ulysses S. Grant (1822–1885)