Boxes As Shipping Containers
Wooden boxes are often used for heavy duty packaging when
- high strength is needed for heavy and difficult loads
- long term warehousing may be needed.
- large size is required
- rigidity and stacking strength is critical
Boxes and crates are not the same. If the sheathing of the container (plywood, lumber, etc.) can be removed, and a framed structure will remain standing, the container would likely be termed a crate. If removal of the sheathing resulted in there being no way of fastening the lumber around the edges of the container, the container would likely be termed a wooden box.
The strength of a wooden box is rated based on the weight it can carry before the cap (top, ends, and sides) is installed. "Skids" or thick bottom runners, are sometimes specified to allow forklift trucks access for lifting.
Performance is strongly influenced by the specific design, type of wood, type of fasteners (nails, etc.), workmanship, etc.
Read more about this topic: Wooden Box
Famous quotes containing the words boxes and/or shipping:
“Always polite, fastidiously dressed in a linen duster and mask, he used to leave behind facetious rhymes signed “Black Bart, Po—8,” in mail and express boxes after he had finished rifling them.”
—For the State of California, U.S. public relief program (1935-1943)
“I need not tell you of the inadequacy of the American shipping marine on the Pacific Coast.... For this reason it seems to me that there is no subject to which Congress can better devote its attention in the coming session than the passage of a bill which shall encourage our merchant marine in such a way as to establish American lines directly between New York and the eastern ports and South American ports, and both our Pacific Coast ports and the Orient and the Philippines.”
—William Howard Taft (1857–1930)