Tippmann A-5 - Field-Stripping

Field-Stripping

Unlike previous Tippmann markers, the A-5 is very easy to field-strip and clean. Tippmann says it can be field stripped in about 60 seconds. This is done by removing four push-pins which hold the tombstone, endcap and grip frame in place.

To field strip an A-5 marker:

• Depressurize the marker by partially unscrewing the propellant supply and firing dry to rid marker of any latent gas.
• Remove barrel from marker.
• Remove four push-pins (#1, #2, #3, and #4). Use pliers and lubricate with paintball marker oil if pins are difficult to remove.
• Depress tombstone latch and pull tombstone to remove it from marker. Remove endcap and grip frame; make sure the velocity screw is screwed in past the aluminum housing, now the valve and bolt assembly will easily slide out the back of the marker.
• Clean chamber and bolt assembly.
• Lubricate o-rings with a few drops of paintball marker oil. Inspect all o-rings for signs of wear. Replace any o-rings that show signs of wear.
• Reassemble marker and replace push-pins.
• Without connecting to C02, cock back the marker and dry fire to ensure it was reassembled properly.

Note: Be sure to clean any residual paint from the hopper area. If it builds up, it can increase the chance of chopping a ball in the future. Q-tips work good for cleaning the hopper area. Also remember to thoroughly clean the barrel.