Copper Pillar Solder Bumping
Recent trends in high-density interconnects have led to the use of copper pillar solder bumps (CPB) for CPU and GPU packaging. CPBs are an attractive replacement for traditional solder bumps because they provide a fixed stand-off independent of pitch. This is extremely important as most of the high-end products are underfilled and a smaller standoff may create difficulties in getting the underfill adhesive to flow under the die.
Figure 2 shows an example of a CPB fabricated by Intel and incorporated into their Presler line of microprocessors among others. The cross section shows copper and a copper pillar (approximately 60 um high) electrically connected through an opening (or via) in the chip passivation layer at the top of the picture. At the bottom is another copper trace on the package substrate with solder between the two copper layers.
Read more about this topic: Thermal Copper Pillar Bump
Famous quotes containing the words copper, pillar and/or bumping:
“He had put, within his reach,
A box of counters and a red-veined stone,
A piece of glass abraded by the beach,
And six or seven shells,
A bottle with bluebells,
And two French copper coins, ranged there with careful art,”
—Coventry Kersey Dighton Patmore (1823–1896)
“Fame’s pillar here, at last, we set,
Out-during marble, brass, or jet,”
—Robert Herrick (1591–1674)
“A ‘spasm band’ is a miscellaneous collection of a soap box, tin cans, pan tops, nails, drumsticks, and little Negro boys. When mixed in the proper proportions this results in the wildest shuffle dancing, accompanied by a bumping rhythm.”
—For the City of New Orleans, U.S. public relief program (1935-1943)