Register Window - Application in CPUs

Application in CPUs

In the Berkeley RISC design, only eight registers out of a total of 64 are visible to the programs. The complete set of registers are known as the register file, and any particular set of eight as a window. The file allows up to eight procedure calls to have their own register sets. As long as the program does not call down chains longer than eight calls deep, the registers never have to be spilled, i.e. saved out to main memory or cache which is a slow process compared to register access. For many programs a chain of six is as deep as the program will go.

By comparison, the Sun Microsystems SPARC architecture provides simultaneous visibility into four sets of eight registers each. Three sets of eight registers each are "windowed". Eight registers (i0 through i7) form the input registers to the current procedure level. Eight registers (L0 through L7) are local to the current procedure level, and eight registers (o0 through o7) are the outputs from the current procedure level to the next level called. When a procedure is called, the register window shifts by sixteen registers, hiding the old input registers and old local registers and making the old output registers the new input registers. The common registers (old output registers and new input registers) are used for parameter passing. Finally, eight registers (g0 through g7) are globally visible to all procedure levels.

The AMD 29000 improved the design by allowing the windows to be of variable size, which helps utilization in the common case where fewer than eight registers are needed for a call. It also separated the registers into a global set of 64, and an additional 128 for the windows.

Register windows also provide an easy upgrade path. Since the additional registers are invisible to the programs, additional windows can be added at any time. For instance, the use of object-oriented programming often results in a greater number of "smaller" calls, which can be accommodated by increasing the windows from eight to sixteen for instance. This was the approach used in the SPARC, which has included more register windows with newer generations of the architecture. The end result is fewer slow register window spill and fill operations because the register windows overflow less often.