Pump Testing
To minimise energy use, and to ensure that pumps are correctly matched to the duty expected pumps, and pumping stations should be regularly tested.
In water supply application, which are usually fitted with centrifugal pumps, individual large pumps should be 70 - 80% efficient. They should be individually tested to ensure they are in the appropriate range, and replaced or prepared as appropriate.
Pumping stations should also be tested collectively, because where pumps can run in combination to meet a given demand, it is often possible for very inefficient combination of pumps to occur. For example. it is perfectly possible to have a large and a small pump operating in parallel, with the smaller pump not delivering any water, but merely consuming energy. See Pump station manager
Pumps are readily tested by fitting a flow meter, measuring the pressure difference between inlet and outlet, and measuring the power consumed.
Another method is thermodynamic pump testing where only the temperature rise and power consumed need be measured.
Read more about this topic: Pump
Famous quotes containing the words pump and/or testing:
“Vivacity, leadership, must be had, and we are not allowed to be nice in choosing. We must fetch the pump with dirty water, if clean cannot be had.”
—Ralph Waldo Emerson (1803–1882)
“Today so much rebellion is aimless and demoralizing precisely because children have no values to challenge. Teenage rebellion is a testing process in which young people try out various values in order to make them their own. But during those years of trial, error, embarrassment, a child needs family standards to fall back on, reliable habits of thought and feeling that provide security and protection.”
—Neil Kurshan (20th century)