The Precise Tone Plan specification for the North American network defines the Call-progress tones used for standard signaling in the PSTN. The tones are as follows:
- dial tone is a continuous tone having frequencies of 350 and 440 Hz at a level of −13 dBm
- ringback tone is defined as comprising frequencies of 440 and 480 Hz at a level of −19 dBm and a cadence of 2 seconds ON and 4 seconds OFF
- busy tone is defined as having frequency components of 480 and 620 Hz at a level of −24 dBm and a cadence of half a second ON and half a second OFF
- reorder tone, also called "fast busy" tone, contains the same frequency components as busy tone at a similar level but with a cadence of 0.25 of a second ON and 0.25 of a second OFF; the original plan had two slightly different versions of the "fast busy" tone, with a cadence of 0.2 of a second ON and 0.3 of a second OFF to signal toll-circuit congestion and a cadence of 0.3 of second ON and 0.2 of a second OFF for local reorder.
Prior to the Precise Tone Plan, devices used other frequencies and levels. Such tones generated by older telephone exchange equipment did not follow the Precise Tone Plan and were either formed as dual frequency tones or equivalently as ring modulated signals where a higher frequency is modulated by a lower frequency.
Read more about Precise Tone Plan: References
Famous quotes containing the words precise, tone and/or plan:
“Once one’s up against it, the precise manner of one’s death has obviously small importance.”
—Albert Camus (1913–1960)
“It hurts me to hear the tone in which the poor are condemned as “shiftless,” or “having a pauper spirit,” just as it would if a crowd mocked at a child for its weakness, or laughed at a lame man because he could not run, or a blind man because he stumbled.”
—Albion Fellows Bacon (1865–1933)
“I have never yet seen any plan which has not been mended by the observations of those who were much inferior in understanding to the person who took the lead in the business.”
—Edmund Burke (1729–1797)