Ox - Shoeing

Shoeing

Working oxen usually require shoes, although in England not all working oxen were shod. Since their hooves are cloven, two shoes or ox cues are required for each hoof, unlike the single shoe of a horse. Ox shoes are usually of approximately half-moon or banana shape, either with or without calkins, and are fitted in symmetrical pairs to the hooves. Unlike horses, oxen are not easily able to balance on three legs while a farrier shoes the fourth. In England, shoeing was accomplished by throwing the ox to the ground and lashing all four feet to a heavy wooden tripod until the shoeing was complete. A similar technique was used in Serbia and, in a simpler form, in India, where it is still practiced. In Italy, where oxen may be very large, shoeing is accomplished using a massive framework of beams in which the animal can be partly or completely lifted from the ground by slings passed under the body; the feet are then lashed to lateral beams or held with a rope while the shoes are fitted.

Such devices were made of wood in the past, but may today be of metal. Similar devices are found in France, Austria, Germany, Spain, Canada and the United States, where they may be called ox slings, ox presses or shoeing stalls. The system was sometimes adopted in England also, where the device was called a crush or trevis; one example is recorded in the Vale of Pewsey. The shoeing of an ox partly lifted in a sling is the subject of John Singer Sargent's painting Shoeing the Ox, while A Smith Shoeing an Ox by Karel Dujardin shows an ox being shod standing, tied to a post by the horns and balanced by supporting the raised hoof.