Abrasives
The Federation of European Producers of Abrasives (FEPA) has four sets of standards to denote size of grains coupled with the type of abrasive. The standards indicate a range of grit sizes that may come within any single designator which consists of a letter (F for bonded abrasives and P for coated abrasives) and a number. Within each series are two standards detailing the larger macrogrit (approximately 12 – 240) and smaller microgrit (approximately 230 – 2000 or 2500) sizes and the different process by which sizes are determined (sieving for the larger grits and sedimentation for the smaller).
While following the common practice of smaller designators meaning coarser grits and similar cut-off marks between macro- and microgrit standards, the F and P series are not compatible. While F 12 and P 12 are only about 3% different in size, P 2000 is more than 750% larger than F 2000 (that is, the particles in P 2000 are about 8.5 times as large as those in F 2000).
Metal surfaces mechanically polished are designated as having a mechanical finish related to the abrasive used.
Read more about this topic: Mesh (scale)