Mendip Rail - Foster Yeoman

Foster Yeoman

Foster Yeoman first purchased its own fleet of 140 12-ton wagons in 1923, to take advantage of the fact that the Great Western Railway line ran adjacent to Dulcote Quarry. When the Torr Works opened in the 1960s, a rail terminal was constructed to support the new quarry and was opened in August 1970, served by a spur from the East Somerset branch line which joins the main line at Witham. Further expansion was soon needed with an additional chord being added between the terminal and the branch line in 1973.

British Rail shunting and mainline locomotives were used initially, but in 1972 Foster Yeoman bought the first of several Class 08 shunting engines. The company also has a General Motors EMD SW1001 switching locomotive which was purchased in 1980.

As a result of poor reliability of the various locomotives used by British Rail to haul stone trains from the West Country (with availability of the Class 56 locomotives from May 1984 as low as 30%, and only 60% of trains running on time), Foster Yeoman began negotiations with British Rail to improve service. Having already supplied its own wagons (with a reliability level of 96%) Foster Yeoman suggested to British Rail that it could operate its own locomotives (which would be the first privately-owned engines to run on British rail tracks). British Rail's problem was the hard tie-in and control of the Rail Unions, but nevertheless BR accepted the principle.

Foster Yeoman issued a tender document which requested 95% reliability. General Motors' bid was ultimately successful, in particular because their proposed design, derived from the EMD SD40-2, was equipped with the well-proven Super Series creep control, which allows superior traction at very low speeds. This, it was found, would enable a single locomotive to haul Foster Yeoman's 4,300 tonne stone trains, whilst two Class 56 or Class 58 engines would be needed to move the same load. This fact also enabled Foster Yeoman to reduced its requirement from the original six locomotives to four.

The contract with General Motors was signed in November 1984 and the new locomotives, built at the GM plant in La Grange, Illinois, were shipped across the Atlantic in January 1986. The JT26CW-SS, newly-designated as British Rail Class 59/0, had a cab layout taken from the Class 58, to make driver assimilation easier, and to meet the British loading gauge a considerable amount of redesign work and various compromises were required from the original GM prototype. Once in the United Kingdom, further tests were undertaken before Foster Yeoman's new locomotives entered service in February 1986. They were officially named in a ceremony at Merehead on 28 June 1986.

The Class 59s delivered 99% reliability, leading Foster Yeoman to order a fifth engine in 1988. In their first ten years of operation the five locomotives between them hauled over 50 million tonnes of aggregates away from Merehead.

The four former-Yeoman locomotives still operated by Mendip Rail are:

• 59001 Yeoman Endeavour
• 59002 Allan J Day (formerly Yeoman Enterprise)
• 59004 Paul A Hammond (formerly Yeoman Challenger)
• 59005 Kenneth J Painter

59003 Yeoman Highlander was exported to Germany in 1997, renumbered as 259 003, and operated by Yeoman/Deutsche Bahn (DB), pulling stone trains. It has since been sold on to Heavy Haul Power International where it is still working on coal trains and pulls the highest train weight of any locomotive presently in Germany.

On 26 May 1991 Kenneth J Painter (59005) (with assistance from Yeoman Endeavour) set the European haulage record, with a stone train weighing 11,982 tonnes and 5,415 feet (1,650 m) long. However the so-called 'mega train' experiment was not very successful, as a coupling in the centre of the train broke.