List of Mills in Oldham - Standing Mills in Oldham

Standing Mills in Oldham

Name Architect Location Built Demolished Served
(Years)
Acre Works Rochdale
Ace P S Stott Chadderton SD897037 53°31′48″N 2°09′25″W / 53.530°N 2.157°W / 53.530; -2.157 (Ace) 1914 **** 53
Notes:
Anchor Westwood
Beal Shaw
Belgrave Potts, Pickup and Dixon Hathershaw 1885 **** 127
Notes: Prominent in the history of Bagley & Wright, used for sewing cotton. Later owned by Platt & Hill.The company bought land off Honeywell Lane, Oldham and erected Belgrave Mill in 1880s which subsequently became known as 'Belgrave Number 1 Mill' as a further three mills were erected on the site in the early part of the 20th century. Yarn produced at the Belgrave Number 1 Mill was bleached or dyed in an on-site facility. Belgrave No. 1 was designed by the architects Potts, Pickup and Dixon. Engine by Woolstenhulmes & Rye.
Cairo Waterhead
Notes:
Chadderton P.S. Stott Chadderton SD907045 53°32′13″N 2°08′31″W / 53.537°N 2.142°W / 53.537; -2.142 (Chadderton) 1885 **** 115
Notes: Spindleage: (1915) 102,456 Platt. Engine:Hicks, Hargreaves and Co. 1100hp
Delta Mill Royton
Devon Mill Hollins
Notes:
Durban Hollins
Earl Mill Hathershaw
Falcon Mill P S Stott on Garforth Street 1885
Notes: Falcon Mill, Victoria Street, Chadderton Falcon Mill, Victoria Street, Chadderton The big single storey building is an unusual (for Oldham) example of a weaving shed among the big spinning mills. Designed by P S Stott in 1885 for the Oldham Velvet Manufacturing Co. In 1915 it had 802 looms powered by an Urmson & Thompson engine.
Fernhurst A H Stott Chadderton SD911064 53°33′14″N 2°08′10″W / 53.554°N 2.136°W / 53.554; -2.136 (Fernhurst) 1905 **** 59
Notes: Spindleage: (1915)112,524 Platts. Engine Browett & Lindley 1400hp. Extended in 1946, taken over by Cotton & Rayon Spinners Ltd.
Gorse P S Stott Chadderton SD897037 53°31′48″N 2°09′25″W / 53.530°N 2.157°W / 53.530; -2.157 ("Gorse") 1908 **** 51
Notes: Gorse (and Rugby) Mill, Chadderton The stair tower is carrying the obligatory crown of antennae. There is a scar on the other side where the engine house was demolished. Architect was P S Stott. Built 1908. Engine was 1600 hp Urmson & Thompson cross compound.
Grape Mill T W Jenkins Royton 1906
Notes: Grape Mill, Royton Built 1906 by the Grape Mill Co Ltd. 126,000 spindle. J Musgrave & Sons horizontal cross compound of 1600 hp. Architect T W Jenkins. Mill still standing
Hartford Mill F W Dixon Werneth (to be demolished for Housing Market Renewal) 1907
Notes: Built 1907 by the Hartford Mill (Oldham)Co Ltd. Extended 1920 and 1924. Closed 1959 and used by Littlewoods as a mail order warehouse until 1992. Architect was F W Dixon, there were 120,000 spindles and power was provided by a very impressive 1500 hp Urmson & Thompson engine.
Heron Hollins ceased production 1960
Notes:
Leesbrook Lees
Notes: ceased production 1990
Lion Mill Royton
Littlemoor Mill Littlemoor
Majestic Waterhead
Notes: ceased production 1982
Maple 1 P.S.Stott, Hathershaw, 53°31′34″N 2°06′26″W / 53.5262°N 2.1071°W / 53.5262; -2.1071 (Maple) 1904
Notes:

It was designed as a double mill by P.S.Stott, in 1904. The first mill was built then and the second mill in 1915. It worked as a mule spinning mill.

It was taken over by Fine Spinners and Doublers in the 1950s.
Nile P S Stott Chadderton SD905043 53°32′06″N 2°08′42″W / 53.535°N 2.145°W / 53.535; -2.145 (Nile) 1898 **** 62
Notes: Spindleage: (1915) 104,000 rings Platts. Engine:Buckley & Taylor 2000hp. When built, this was the largest ring spinning mill in the world. It was the last mill built with a beam engine, and the last to use vertical shafts and gears. An extra storey was added in 1905, the card room was extended in 1907 and further extensions in 1912 and 1914.
Orme Waterhead
Notes:
Osborne Architect Robinson St, Chadderton SD914057 53°32′53″N 2°07′52″W / 53.548°N 2.131°W / 53.548; -2.131 ("Osborne") 1853 1973 120
Notes: Spindleage (1915) 46,736. Built in 1853 by Robert Ogden & Co. Scene of an accident, 15 March 1875, when a ten-year employee was burnt to death. Taken over in 1889 by the Osborne Mill Co Ltd, and extended in 1903 and in 1926, now residential.
Ram (Orb) A H Stott
P S Stott
Chadderton SD896041 53°31′59″N 2°09′29″W / 53.533°N 2.158°W / 53.533; -2.158 (Ram) 1907 **** 64
Notes: Pair of mills on Osborne and Waddington Streets. No. 1 (back)was by A H Stott in 1873, extended 1891 and 1900, closed 1968. 66,008 spindles in 1910.No. 2 was by P S Stott in 1912 with 54,720 spindles. Also closed 1968. No. 1 had Petrie engines and then from 1920 a C A Parsons turbine. No. 2 had a 1200 hp Hick, Hargreaves. Now in multiple occupation.
Raven P S Stott Chadderton SD903042 53°32′02″N 2°08′53″W / 53.534°N 2.148°W / 53.534; -2.148 (Raven) 1907 **** 52
Notes: Spindleage (1915) 90,432 mule, 18,240 ring, Asa Lees. Engine:Buckley & Taylor 1500hp.
Royd Hollins SD 53°31′38″N 2°07′58″W / 53.527188°N 2.132708°W / 53.527188; -2.132708 ("Royd")
Notes: In the illustration, the four tall arched windows mark the engine house that contained a J & E Wood inverted vertical triple expansion engine. The open doors in front mark the boiler house that contained a row of Lancashire boilers. It ceased production 1981
Rugby F.W.Dixon Chadderton SD896039 53°31′55″N 2°09′29″W / 53.532°N 2.158°W / 53.532; -2.158 ("Rugby") 1908 **** 77
Notes: Spindleage (1915) 113,613 Platts. Engine: George Saxon, 1200hp.
Vine Mill Royton
Werneth Mill Werneth


Read more about this topic:  List Of Mills In Oldham

Famous quotes containing the words standing and/or mills:

    O for breath to utter what is like thee! you tailor’s yard,
    you sheath, you bowcase, you vile standing tuck.
    William Shakespeare (1564–1616)

    Prestige is the shadow of money and power. Where these are, there it is. Like the national market for soap or automobiles and the enlarged arena of federal power, the national cash-in area for prestige has grown, slowly being consolidated into a truly national system.
    —C. Wright Mills (1916–1962)