Lantern Clock - Clock Parts

Clock Parts

The London Clockmakers equipped their lantern clocks with four pillars inspired by classical columns. Attached to these pillars are classical vase-shaped finials and well-shaped feet. To those finials a bell strap is attached that spreads from four corners and holds a bell. To hide the hammer and the clock movement from the spectator three frets are attached to the finials. The front fret is pierced and engraved whereas the two side frets are pierced but usually left blank. The front of the clock case consists of an engraved dial plate on which a circular dial ring is attached. Almost all lantern clocks originally had just one clock hand to indicate the hours. A standard lantern clock strikes the hours on a large bell and is often equipped with an alarm that rings the same bell. Two doors provide access to the movement and are hinged at the sides of the clock. One or more weights are hanging from ropes or chains at the bottom of the clock.


Read more about this topic:  Lantern Clock

Famous quotes containing the words clock and/or parts:

    “Pop” Wyman ruled here with a firm but gentle hand; no drunken man was ever served at the bar; no married man was allowed to play at the tables; across the face of the large clock was written “Please Don’t Swear,” and over the orchestra appeared the gentle admonition, “Don’t Shoot the Pianist—He’s Doing His Damndest.”
    —Administration in the State of Colo, U.S. public relief program. Colorado: A Guide to the Highest State (The WPA Guide to Colorado)

    There is something in this native land business and you cannot get away from it, in peace time you do not seem to notice it much particularly when you live in foreign parts but when there is a war and you are all alone and completely cut off from knowing about your country well then there it is, your native land is your native land, it certainly is.
    Gertrude Stein (1874–1946)