How It Works
A horn antenna serves the same function for electromagnetic waves that an acoustical horn does for sound waves in a musical instrument such as a trumpet. It provides a gradual transition structure to match the impedance of a tube to the impedance of free space, enabling the waves from the tube to radiate efficiently into space.
If a simple open-ended waveguide is used as an antenna, without the horn, the sudden end of the conductive walls causes an abrupt impedance change at the aperture, from the wave impedance in the waveguide to the impedance of free space, (about 377 ohms). When radio waves travelling through the waveguide hit the opening, this impedance-step reflects a significant fraction of the wave energy back down the guide toward the source, so that not all of the power is radiated. This is similar to the reflection at an open-ended transmission line or a boundary between optical mediums with a low and high index of refraction, like at a glass surface. The reflected waves cause standing waves in the waveguide, increasing the SWR, wasting energy and possibly overheating the transmitter. In addition, the small aperture of the waveguide (less than one wavelength) causes significant diffraction of the waves issuing from it, resulting in a wide radiation pattern without much directivity.
To improve these poor characteristics, the ends of the waveguide are flared out to form a horn. The taper of the horn changes the impedance gradually along the horn's length. This acts like an impedance matching transformer, allowing most of the wave energy to radiate out the end of the horn into space, with minimal reflection. The taper functions similarly to a tapered transmission line, or an optical medium with a smoothly-varying refractive index. In addition, the wide aperture of the horn projects the waves in a narrow beam
The horn shape that gives minimum reflected power is an exponential taper. Exponential horns are used in special applications that require minimum signal loss, such as satellite antennas and radio telescopes. However conical and pyramidal horns are most widely used, because they have straight sides and are easier to design and fabricate.
Read more about this topic: Horn Antenna
Famous quotes containing the word works:
“Men seem anxious to accomplish an orderly retreat through the centuries, earnestly rebuilding the works behind them, as they are battered down by the encroachments of time; but while they loiter, they and their works both fall prey to the arch enemy.”
—Henry David Thoreau (1817–1862)